Specification

Performance Potential:

  • Garden Waste:   up to 170 cbm/hr
  • Bark:   up to 220 cbm/hr
  • Mature Wood:   up to 110 cbm/hr

Intake Opening:

  • 720 mm x 1,500 mm

Rotor Diameter:

  • 1,040 mm

Number of Tools:

  • 22 easyfit hammers, 16 easyguard wear protectors (up to 38 compoments, depnding on setup)

Material Outfeed:

  • Conveyor belt with an ejection height of up to 4.70 m (approximate). Magnets available on request.

Main Drive:

  • Mercedes Benz OM 460/LA engine with power rating of 375 kW (510 hp) (Euromot 3B emission level)

Weight/Basic Version:

  • Approximately 22,600 kg with conveyor belt

Control System Features:

  • Easygreen control system
  • 15 channel remote control system
  • DIP switch functions
  • Impact protection system (IPS)
  • JES automatic system
  • IBC system
  • VARIO-flex system
  • SENSOTRONIC
  • Automatic overload control unit
  • Automatic feed height unit

BA 725 D(XL)

Nowadays, wood-based biomass is not only used for composting purposes in composting sites, but also for the recovery of bioenergy.  The new BA 725 is intended to be used for the processing of grass/foliage cuttings, bio-waste, trunk wood with diameters up to 45 cm (approximate), pre-crushed roots, bark, scrap wood and round bales from SRC harvesting. The processed material improves the efficiency of the biogas plants.

The machine has been fitted with the "Easygreen" controller.  In addition to the well known machine monitoring function, this controller also provides the operator with service and economic data.  The controller is also fitted with the new energy saving JES (JENZ Energy Saver) function as standard.  This enables the operator to run the complete unit down to tickover at the push of a button if there is a brief interruption in work, and to run it back up to operating speed just as quickly.  The function is supplemented by the Vario-Flex controller fitted as standard.  The operator optimises motor management by selecting the optimum rotational speed in the motor "green loading range" to match the material being processed.  The result is that fuel consumption as low as 0.3 litres per cubic meter can be achieved.

The BA 725 is fitted with twin gears - dual belt drive unit for adjusting the speed of the rotor (speed range:  400 - 1000 rpm).

Owing to the large number of possible applications, there is a whole list of additional extras available for the BA 725, which can alter the total weight significantly.  A flexible chassis is therefore of much importance.  A choice can be made between the following:  double-axle rigid drawbar trailer, triple-axle rigid drawbar trailer, full trailer with swan neck or, for the XL design, full trailer with a 6 metre long conveyor intake.

Download Brochure

Download Brochure

Video

Jenz Rayco
0 Items in your basket
Checkout